The 'modern era' comes to Lambing Flat: Bogie rolling stock

The Indian red diesels need something to haul, so, thanks to all the lovely r-t-r 1960s/1970s bogie rolling stock now available, it is a simple matter of pulling something out of the box, checking the couplings and wheels against the standards gauge, weathering it and putting it on the track. So easy!

Here are some details of some of the 'bogie exchange' vehicles that have joined the fleet recently.

This is an On Track Models BLF that I converted to a BLX about two years ago. I wanted a 1960s era BLX for Lambing Flat, but didn't want three of them, so I purchased a single-pack BLF from Barnes Hobbies in Newcastle and, since a broad gauge only BLF wasn't *quite* right for NSW standard gauge Lambing Flat, I spent an hour or two modifying it. First I replaced the spoked-wheel broad gauge appropriate bogies with a pair of 'bogie exchange' bogies from the spares box (from under an On Track LLV, I think), then carefully removed the 'F' from the BLF code with a toothpick moistened with Metho. When that was done I put an 'X' in its place (SEM decal sheet, I think), then covered the 'P' plates with 'X' decals from a BGB decal sheet. Then I cut some 2" x 4" timber and 'bodged up' the shunter's steps to something more closely resembling the timber version more appropriate to the period. After a couple of years in 'pristine' condition, I finally got around to weathering it, lightly, as befits my era, with airbrushed Tamiya and Aqueous Hobby Color acrylic paint. 

This is an Auscision KLY in PTC blue. It is a little late for LF's 'core' period, but I do like the KLY vans! I lightly weathered it to represent a very new vehicle that hasn't managed to acquire more than a light coating of road dust, once more with airbrushed Tamiya and Aqueous Hobby Color acrylics. However, I wasn't happy with it, as it looked a little too clean, so I came back a couple of weeks later and added some more 'dirt'. Much more as I remember them now.

In keeping with the 1970s PTC blue theme is this SDS OCY, carrying a load of RACE containers. Another one lightly weathered to represent how I remember OCYs from the 1970s. Below is another shot, this time without the containers, showing the grubby deck.

This is a pair of Orient Express Reproductions r-t-r OX SAR open wagons, fitted with tarpaulins, as the lack of interior detail does look a little strange on the layout. The vehicles themselves are straight 'out of the box', except that the far vehicle has had a red SAR logo added. The wagons were then weathered with my usual acrylic paint diluted in Isocol alcohol method and then some tarps, made from some old BGB printed foil tarps I have had 'in stock' since the early 1980s were added. The tiedowns are thread, superglued to the tarp and the vehicle. The tarps were sprayed with flat clear once they were fitted, to kill the sheen of the original BGB item. A light spray of Tamiya XF-52 Flat Earth was then 'misted' over the tarps (and the wagons) to 'tie it all together'.

This is an Austrains 'Manildra' WHX fitted with SDS exchange bogies and the black panel where the old code was added penned in with ink. The model was then sprayed with flat clear to seal the ink and then it was weathered using my standard sprayed acrylic method. I'm very pleased with the way this one has come up. Below is another shot with the yard looking very 'late 1960s'.

While not quite 'bogie exchange' vehicles, (for bogie exchange we need the GX subvariant) this pair of Eureka G wagons fill the need for high speed capable bogie open wagons on the Sydney-Melbourne corridor. Despite having been introduced in the early 1950s for coal haulage, photos of 'high wheeler' mainline trains in the 1960s show plenty of G type wagons in use and most are in pretty good condition, so these two were weathered accordingly.

Not everything new on the layout is r-t-r; the occasional kit-built model still sneaks through! This is a NSWGR BDX constructed from a AR Kits injection-moulded kit. I hadn't built an injection-moulded plastic kit for a very long time, but it had come to my attention that one major class of late steam/early diesel era rolling stock was not represented in Lambing Flat's collection, the BDX bogie open wagon. An opportune purchase at the 2017 Brisbane exhibition recently addressed that oversight and, in something like record time, the model was assembled! Of course, it isn't built as the manufacturer intended (something I never do!), but has had some extra detail added to represent the appearance of one of the 1963/1967 batch as it may have appeared towards the end of the 1960s. As I hadn't been able to find many decent photos of BDX wagons from that period while I was building it, there was a certain amount of guesswork involved and I eventually found out (after it was painted!) that the top right handrail wasn't quite in the right position! As with the rest of them, the photos I have of them in the late 1960s show them to be in quite good condition still, so it was weathered accordingly.

Of course, if one is going to run post-1966 goods trains, one should have the occasional 'red' van to put on the back. As I only had one (the Trainorama GHG with InFront Models dress-up kit I reviewed in AMRM Issue 287, April 2011), I thought it was about time I had another one, so this Trainorama MHG had the handrails and lampirons picked out in black and then lightly weathered to represent a newly rebuilt and repainted van.

However, the 'high wheelers' of the 1960s didn't only trail nice new Indian red brakevans; there were also the 1920s-built SHG vans that were fitted with new 2AE high speed bogies around 1962 to help fill a desperate shortage of brakevans capable of high speeds to run on the newly-opened 'Gauge' to Melbourne. The release of the SDS SHG/BHG brakevans gave me the opportunity to add a BHG to the collection (I already had two kit-built SHGs, so only a BHG was acquired). Unlike the other goods vehicles shown here, where I went for the fairly new, lightly weathered effect, this BHG was heavily weathered to represent the appearance of the prototypes in the 1960s. I really like the attention to detail that SDS have given to this model and I particularly like the Indian red window frames, which was so characteristic of Gunmetal grey brakevans in the late 1960s.

That's enough for now (there is a lot more to come!). Next time I will describe the huge number of new four-wheel and bogie 'intrastate' vehicles that have also joined the fleet.

It's been a while...

Good grief! I've managed two posts in the same year!

No particular theme with this one, just a few random shots of models I have completed over the last year or so.

Lambing Flat now has a very modern diesel, an Auscision 422 class. It has been fitted with a Loksound chip loaded with the sound scheme from DCCSounds. It runs and sounds very well. It has not been weathered yet, but will be as soon as I can get around to it. As it is a *very* 'modern' engine for Lambing Flat it will only get a very light weathering so it represents the prototype in its first weeks of life. In the meantime, it is very nice listening to the lovely GM growl of one of my very favourite NSWGR diesels.

Another project almost completed is this standard NSWGR brick and steel road overbridge.The bridge was built from measurements I took in January 1995 of the road overbridge just south of Jerrawa Viaduct on the NSW Main South line, though the model has been slightly modified to suit the position it will occupy on the layout. The 'steelwork' of the bridge was constructed from Evergreen Styrene shapes. The 'brickwork' was made by glueing brickpaper over thick card. The brickpaper was downloaded from the Paperbrick site:http://paperbrick.co.uk/ A very useful site indeed! I had originally intended to build the model with correct 'English Bond' brickwork and downloaded sample sheets of that bond... however, I also downloaded a sheet of stretcher bond in the same colour... guess which one I printed out when it came time to start construction! I didn't realise I was using the wrong bond till about halfway through construction, so perhaps it isn't that noticeable! Now all I have to do is weather it and instal it on the layout. 

Some may have read my review of  Bragdon Enterprises' weathering powders printed in the August 2014 issue of AMRM. Here are a couple of different photos of some of the models I weathered for the review. Above is a StructOrama ready-to-place HO scale shed modified from standard (bottom building) to look more like a NSWGR building (top building), in order to house the wagon repair staff and equipment at Lambing Flat's 'New Yard'. As befits my period, I resolved to repaint it in NSWGR 'stone' colours. First I carefully painted the window frames Tamiya XF-2 Flat White, then did the walls in Tamiya XF-20 Medium Grey. Once that had dried I painted the roof with Tamiya XF-16 Flat Aluminum the window trim, doors, barge boards on the gable ends of the building and the downpipes Humbrol No.62 Leather, which is the closest colour to NSWGR Medium Stone that I have found. Then the inside of the gutters was painted dirty black and the gutters themselves Tamiya XF-10 Flat Brown to represent the NSWGR Dark Stone colour. The edge of the base was painted Tamiya XF-55 Deck Tan to represent the concrete slab the building rests on.

The photo above shows it before weathering, as a comparison with the standard article. Below is the building after weathering with the Bradgon powders..

Below is my Eureka 620/720 class two-car diesel train (not a bloody railmotor, you ignorant Sassenachs! ;), weathered with a little acrylic paint and some Bragdon Enterprises weathering powders. The silver wheel faces were painted brown with a Floquil paint pen and the grills undercoated with Tamiya Matt Black, then the entire train was weathered with the powders. I'm aiming for a fairly clean look (the 620s were fairly new in my timeframe, as well as reasonably well looked after), so I was after a 'dusty' look, but not 'disgusting'! I'm still not completely satisfied though, particularly with the roof and grills (there was no black in the sample pack), but it is definitely a huge improvement over the unweathered version.

I also reweathered my Trainorama 4429, as the acrylic paint weathering applied back in 2005 had started to fade, particularly on the bogies, so I brushed on a quick coat of Grimy Grey Bradgon powder and this is the result. I'm very pleased and quite intrigued at how quickly and easily one gets realistic results with the weathering powders. 

Here is another 'before and after' comparison showing two Austrains 48' goods brakevans. The LHG at the bottom is straight out of the box, except that I have painted the wheel rims brown. The OHG at the top has had the coupler release levers removed (the prototypes were screw coupled), had the wheel rims painted brown, a little dilute acrylic brown 'washed' over the underframe and a little brown/black 'washed' over the roof to tone it down a bit, while the rest was done with the Bradgon weathering powders.

I'm still weathering the 'old fashioned' way with acrylic paint. Here are a couple I have completed over the last couple of years. Here is an 'as delivered' Trainorama MHG weathered to represent a fairly recently outshopped vehicle, as not everything was decrepit and ready for the knacker's yard! A light dusting of Tamiya XF-52 Flat Earth and some Aqueous Hobby Color H343 Soot, with some Tamiya XF-10 Flat Brown for the rust has bought up the detail, but kept the vehicle looking relatively clean and new.

This other Traino MHG has been more heavily weathered to represent a vehicle that has been 'out on the road' for a much longer period, to the extent that it has suffered a broken window at some stage and had the window frame replaced with an Indian red one from carriage stores, something that was quite common in the 1960s. 

I've also been madly weathering what seems like boxes and boxes of Austrains four-wheel vans, using my standard diluted acrylic paint methods. Here are just a few examples.

I haven't just been 'plonking', I have also completed a pair of IDR NSWGR B wagon kits. As usual, they aren't *quite* as the manufacturer intended... I have added uncoupling levers and substituted some much closer to scale door bangs than were provided in the kit. A very nice model and dead easy (and quick) to put together. This one has been weathered and I've also added a little 'left over' coal to the interior for when it is running empty.

Infrastructure hasn't been neglected either. This is a close up of the signal box at Back Creek Jct seen in an earlier post. The box was constructed from a Stephen Johnson urethane kit I have had salted away for about 20 years, with the platform scratchbuilt from timber. The box nameboard was assembled in Photoshop and then printed out.

The junction signal for Back Creek Junction was kit-bashed from a combination of old Ratio GWR posts and balance weights, modified Casula etched brass signal arms, home cast whitemetal finials (from self constructed masters, no pirating here! ), Uneek etched brass ladder and the rest scratchbuilt. It is based on drawing of a standard Byles era bracket signal.

Every now and then a small detail item gets added to the layout. After twenty years or so of unfettered access to the railway reservation where the private siding to the Co-op cool stores leaves the main line, a gate has been provided. I scratchbuilt the standard NSWGR pipe gate in brass wire about 10 years ago, undercoated it about two years ago and finally painted and weathered a couple of weeks ago! The standard colour scheme for gates at private level crossings and private sidings was a red colour, but I have never seen one in 'pristine' condition, the ones I saw were always dull, dirty and rusty, so the model was finished accordingly. It is hinged and is openable.

There seems to be a bit of a theme developing here... of projects that take decades to complete! I recently rediscovered an old Vacey Ash (Biltezi) card kit for a British 4mm scale church that I purchased back in the late 1970s. The price tag on it was $1.00! I originally purchased it because it resembled the sort of Gothic revival churches erected in Australia in the 19th century. It was built pretty much as the designer intended, as I will use it as a 'background' building, however, the flat, printed 'slate' roof was extremely unconvincing, so I covered it with some corrugated card and then scratchbuilt bargeboards and gutters. The slightly 'wonky' bell tower is down to a certain giant cat... 

And another 'long distance' project, I photographed and measured the prototype of this flammable materials store at Young on 25 August 1983, over 30 years ago! The unknown dimensions of the building were worked out by 'straightening up' the 1983 photos of the building in Photoshop, adjusting the size until the known dimensions matched HO scale, then printing it out as a plan. Waiting 30 years to build it has made it a lot easier to build! Construction is card, with a box constructed from thick card with corrugated card glued on top and details scratchbuilt from timber and styrene. The sign is a Photoshopped and printed image of the original. 

Pretty pictures...

Was playing around with the camera recently and took these shots...

This shows my Classic brass 3324 drifting through the station after her recent 'tone up' to the weathering. Originally painted in the mid-1980s, the paint had become a little 'tired' and faded over the years (there is a 'before' picture in an earlier post) so I gave her a touch up. After a good wash (being very careful not to get the DCC chip and speaker in the tender wet!) I touched up the areas where the paint had worn off the brass with a spray of SEM self-etch black, let down with a little SEM grey. When that had dried  I reweathered the loco with Tamiya and Badger acrylics, diluted in Isocol alcohol.

Here is another shot of her, which also includes part of a recently 'backdated' On Track Models LLV. The backdating consisted of moving the outer lamp irons to the high position they occupied before the late 1970s, plus adding the end handrails removed when the lamp irons were lowered. Buffers and AR Kits 'Andrews' bogies have also been added.

Here is close up view of the LLV.

It was weathered by 'washing' a little dilute in Isocol alochol Tamiya XF-10 Flat Brown into the wheel discs, the bogie springs, the door hinges and the door catches. Then a light spray of very dilute in Isocol Tamiya XF-52 Flat Earth all over to give that typical 'dusty' look. 

 

I've also managed to finish off the 53 class, it has had the paint damage (mostly!) touched up, glass fitted to the headlight, a rolled up canvas weathershield added behind the cab and a new fireman recruited.

Well, I thought it was finished until I read Ray Pilgrim's recent post on the easy way to add a 'chuff' cam...

Last, but not least, a 'what used to be', or perhaps a 'what will be again', once I get a DCC chip fitted.

My dear old Trax brass 1248 standing at the station with a typical 1950s branchline passenger train, two 'dogboxes' and a van. This scene may soon be able to be recreated again, now that Ian Phemister has shown me the way to get a Tsunami into the 'small engines'...